Alpha Technologies AlphaNet IDH4 for XM3-HP Series - Technical Manual - Manual (Page 55)

55 746-257-B5-001, Rev. A1 (11/2013)
6.0 Data Management, continued
Accompanying the release of the IDH4 Series are new MIB files. These are backward-compatible with
the existing Alpha Technologies DOCSIS transponders. These MIBs are available by contacting Alpha
Technical Support or from the Alpha website. A complete listing is shown below:
ATI-BB-SYS-APPS-MIB.my
ATI-BB-SYS-LOGS-MIB.my
ATI-BB-SYS-VIEW-MIB.my
ATI-MANAGEMENT-MIB.my
ATI-MGMT-SNMP-MIB.my
ATI-MGMT-SYS-ACCESS-MIB.my
ATI-MGMT-SYS-DOWNLOAD-MIB.my
ATI-MGMT-SYS-GENRL-CTRL-MIB.my
ATI-MGMT-SYS-GENRL-INFO-MIB.my
ATI-MGMT-SYS-IO-MIB.my
ATI-MGMT-SYS-MIB.my
ATI-MGMT-SYS-NV-DEFAULTS.my
ATI-MGMT-SYS-PHONEHOME-MIB.my
ATI-MGMT-SYS-SERVERS-MIB.my
ATI-MGMT-SYS-TEMP-MGR-MIB.my
ATI-MPSPS-MIB.my
ATI-PKT-CABLE-UPS-MIB.my
ATI-PRODUCT-PLATFORMS-MIB.my
ATI-ROOT-MIB.my
ATI-TABLES-MIB.my
ATL-ROOT-MIB.my
MIB browsers such as MG-Soft (www.mg-soft.com) require these MIBs to be compiled into the browser
for the branches and parameters to be ordered and displayed properly. Refer to your MIB browser’s
documentation for instructions on compiling MIB files.
The following MIB files may be required (see http://www.simpleWeb.org) to be compiled into the MIB
browser prior to the Alpha MIB files:
RFC-1212
RFC-1215
RFC1155-SMI
SNMPv2-MIB
SNMPv2-TC
Additionally, there are four MIBs from Broadcom that are necessary to support the new features of the
IDH4 Series. They are:
BRCM-CABLEDATA-MGMT.my
BRCM-CABLEDATA-SMI.my
BRCM-HTTP-MGMT.my
BRCM-TELNET-MGMT.my
6.3 The Alpha MIBs