Extron Electronics PoleVault Digital Switcher Systems PVS 405D - Manual (Page 6)

B4. Cable the switcher ................................. 46
B5. Final Installation ...................................... 46
C. WallVault System
(USFM 100 Short Throw Wall Mount Kit) ...... 47
C1. Install the USFM 100 Base Plate ............ 48
For drywall with wood studs ......................... 48
For drywall with steel studs ........................... 48
C2. Install the switcher onto the Base Plate .. 48
C3. Run the cables to the
USFM 100 location ................................ 49
If running cable behind the walls: .................. 49
If using a surface raceway or conduit: ........... 49
C4. Cable the switcher ................................. 50
C5. Attach the Boom Arm, Power Supply,
and Projector ......................................... 50
D. PlenumVault System
(PVM 220 PlenumVault Mount Kit) ................ 52
D1. Remove the device mounting plate
from the access door ............................. 53
D2. Remove ceiling tile and install
suspension cables. ................................. 53
D3. Suspend the main PVM 220
enclosure from the ceiling. ...................... 54
D4. Run AC power wiring to the AC module
in the PVM 220 ...................................... 55
D5. Run signal and control cables to the
PVM 220. ............................................... 56
D6. Install devices onto the device mounting
plate. ...................................................... 57
D7. Cut and install the ceiling tile in the
access door. .......................................... 57
D8. Install the device mounting plate onto
the access door. .................................... 58
D9. Cable the switcher ................................ 58
D10. Verify and configure the setup. ............. 59
D11. Attach the door tether to the door. ....... 59
D12. Secure the door latches. ..................... 59
Stage 5:
Configuring the
PVS 405D Switcher ........................................... 61
1. Configure the Switcher —
PCS Product Configuration Software
Program ...................................................... 61
2. Configure the System —
Global Configurator ..................................... 62
3. Test the System ........................................ 63
4. Final Installation ........................................ 65
Optional Accessory Installation —
VoiceLift System ............................................ 66
VoiceLift System Included parts: ................... 66
Installation Procedure ................................... 66
Optional Accessory Installation —
Priority Page Sensor (PPS 35) ...................... 67
Installation Procedure ................................... 68
Optional Accessory Installation —
Priority Page Sensor Kit (PPS 25) ................. 68
Priority Page Sensor Kit Included Parts: ........ 69
Installation Procedure ................................... 70
Testing and Adjustment Procedure ............... 72
Outline of Installation Steps for
WallVault Digital Systems (WMK 160) ............... 73
Outline of Installation Steps for
WallVault Digital Systems (USFM 100) .............. 74
Outline of Installation Steps for
PlenumVault Digital Systems (PVM 220)........... 75
Extron Warranty ................................................ 77
Outline of Installation Steps for
PoleVault Digital Systems ................................ 78
PoleVault Digital Systems • Contents v