Items not included, Installation tools, Items not included installation tools – Extron Electronics PoleVault Digital Switcher Systems PVS 405D User Manual
Page 18

•
Drywall saw and hacksaw blade mounted on
handle (for cutting ceiling tiles)
•
Flashlight and safety goggles
•
Razor knife
•
2 inch hole saw
•
Painter’s tape (to mark up walls), pencil, and
marker pen
•
RJ-45 crimpers and RJ-45 connectors
•
Voltage tester
•
Fish tape, pull string, and electrical tape (for
taping fish tape to pull string)
•
Zip ties
•
Vacuum cleaner
•
Heat gun
Items Not Included
The following items are not included in the systems. However, input and display devices are
essential parts of the system, and at any installation they may vary depending on their use.
This list suggests various devices that may be used.
•
Projector (or display device)
•
Screen (and mounting hardware)
•
Input devices, such as:
•
Blu-ray, DVD/CD/VCR combo player (and cables)
•
Document camera (and cables)
•
PC or Mac computer (with keyboard, mouse, local monitor, VGA cables,
RJ-45 network cables, power cords, and, where desired, a P/2 DA2 or distribution
amplifier (DA) for PC signal to local monitor)
•
Installation hardware needed (may vary per installation):
•
Bolts for concrete structural ceilings where needed
•
Toggle bolts (used for screen mounting on dry wall)
•
S-hooks for hanging the screen
•
Spare ceiling tiles in case of accidental damage during installation
•
Electrical box, where installation of a box on the PCM 340 is desired
•
Safety wire, lag eye bolts, and strain reliefs for installation and securing ceiling
speakers
•
Heat shrink, extension cord
Installation Tools
To aid the professional installer, this checklist gives the tools recommended to complete
the installation. Tools should include, but are not confined to:
•
Laser level, or two levels (large for screen
installation, small for wall plates and projector
mounts)
•
Tape measure
•
Stud finder
•
Drill and drill bit set including a unibit to cut
through metal studs
•
Extension drill bit (3/4 inch min., 4 to 8 foot
length, to drill through fire breaks)
•
Socket set
•
Pipe strap or wrapped pipe wrench
•
Pliers and wire strippers
•
Standard screwdriver set and Extron Tweeker
•
Cable cutters (to cut safety wire)
PoleVault Digital Systems • Introduction
12