C. wallvault system, Usfm 100 short throw wall mount kit), C. wallvault short throw system – Extron Electronics PoleVault Digital Switcher Systems PVS 405D User Manual
Page 53
C. WallVault System (USFM 100 Short Throw Wall Mount Kit)
•
Where it goes: Installs onto a wall close the short throw projector location.
•
What it does: Supports the short throw projector and hides from view the installed PVS 405D switcher,
power supply, and any installed optional accessories.
WARNING:
Before commencing installation, the wall structure must be examined to determine if it is suitable for the
proper installation and support of this product. If needed, the installer should reinforce the wall. Drywalls should
have a minimum thickness of 1/2 inch and a maximum thickness of 5/8 inch.
Improper installation of this product could lead to serious injury.
NOTE: Before installation, see the user manual for the display device to determine the proper location and placement
of the mount. Take into consideration the projector lens offset, screen size, screen aspect, and projected image throw
) for the dimensions of the USFM 100 to aid
in this determination.
Plastic Enclosure Cover
Boom Arm
Base Plate
Arm Cover (bottom)
Arm Cover (top)
Arm Cover (front)
Device Mounting Plate
USFM 100 Base Plate.
Level
Cutout for
Signal Cable
Access
Marker for
Pilot Hole
USFM 100
Base Plate
Mounting
Holes
PoleVault Digital Systems • Installation — Stage 4 (USFM 100 and PVS 405D)
47