GE Industrial Solutions Entellisys System User Manual User Manual
Page 188

Alarms and events
188
A
H-001C
Caution: Firmware Download Failed for [CPU A/B/Messngr].Cannot Erase
Firmware.Replace CPU
H-001D
Firmware Downloaded OK To [CPU A/B/Messngr]
H-001E
Firmware Download Failed for [CPU A/B/Messngr]
H-0020
Caution: Firmware Download to [CPU A/B/Messngr] Cannot be Verified
H-0022
Attention: Flash File Error in [CPU A/B/Messngr].Unable to disable Flash Pgm
Mode.Replace CPU
H-0024
Caution: Firmware Dwnld Failed.Err Reading Messnger Status for [Breaker(s)]
H-0025
Caution: Firmware Dwnld Failed.Err Reading Messnger Status during Switch for
[Breaker(s)]
H-0026
Attention: System Freq [50/60]Hz While CPU Synch Clock Freq [60/50]Hz
H-0027
Caution: CPUA and CPUB have duplicate IDs
H-0028
Caution: Invalid ID for CPUA. Expecting ID 0
H-0029
Caution: Invalid ID for CPUB. Expecting ID 1
H-002A
Attn:Settings Discrepancy btwn CPUA & CPUB.Updt in Maintenance-Settings Menu
H-002B
Caution: Settings Update Failed.Retry will Occur in 30 minutes
H-002C
Caution: IP Error 1 For IP Address [n.n.n.n]
H-002D
Caution: Event Log size reached Max Limit for [CPU A/B].Event retrieval stopped
H-002E
Event Log Read Resumed for [CPU A/B]
H-0030
Note: FTP Error 1
H-0031
Note: FTP Error 2
H-0032
Note: FTP Error 3
H-0033
Note: FTP Error 4
H-0034
Note: FTP Error 5
H-0035
Note: FTP Error 6
H-0036
Note: FTP Error 7
H-0037
Note: FTP Error 8
H-0038
Note: FTP Error 9
H-0039
Note: FTP Error 10
Table A-1 Sequence of events cause code cross reference index
Cause
Event Text
Page