AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 92)

SIP–DECT OM System Manual Release 3.0 7 OMM Web Service
Aastra depl-1624/1.0 Page: 92 (241)
The OMM determines the display order of the directories in the handset menu by the order
specified by the administrator.
The following tasks can be performed on the Directory page:
•
creating and changing LDAP entries (see chapter 7.9.1.1),
•
deleting LDAP entries(see chapter 7.9.2.2).
7.9.2.1 Creating and Changing LDAP Servers
1 To configure a new LDAP entry press the New button on the Directory page.
To change the configuration of an existing entry click on the icon left behind the entry.
The New LDAP entry resp. the Configure LDAP entry dialog opens.
1 On the LDAP entry page enter the parameters for the LDAP access, see parameter
description below.
2 Press the OK button to create or change an LDAP directory entry.
The following parameters can be set per LDAP directory entry:
•
Active flag : allows to enable/disable a specific entry.
•
Order : determines the position in the handset menu (1 – top; 5 – bottom).
•
Server name (mandatory): Enter the name or IP address of the LDAP server.
•
Server port (mandatory): Enter the server port number (default: 389)
Note: SSL (default port 689) is not supported.
Windows® Active Directory Server uses port 3268.
•
Search base : The search base has to be edited (e.g. “ou=people,o=my com”).
•
User name , Password : User name (a distinguished name) and password may be filled, if
requested by the LDAP Server. Otherwise an anonymous bind takes place.
Note: The DECT IP OMM supports LDAP simple bind.