AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 15)

SIP–DECT OM System Manual Release 3.0 1 Overview
Aastra depl-1624/1.0 Page: 15 (241)
1.3.3 OMM Capacities and Features
The OMM capacities are:
Feature/SW Release Release 1.8 Release 2.1 Release 3.0 or later
RFP OMM Linux x86
server OMM
RFP OMM Linux x86
server OMM
RFP OMM Linux x86
server OMM
L-RFP:
RFP L32/34 IP and
RFP L42 WLAN 256 - 20 - 20
1
-
Standard RFP:
RFP 32/34 IP and
RFP 42 WLAN - - 256
2
2048
2
256
1, 2
2048
2
L-RFP:
RFP L35/36/37 IP
and RFP L43 WLAN - - - - 20 -
Standard RFP:
RFP 35/36/37 IP and
RFP 43 WLAN - - - - 256 2 2048 2
Handsets / users 512 - 512 4500 512 4500
Message / Alarm
receive - - yes / yes 2 yes / yes 2 yes / yes 2 yes / yes 2
Message send - - yes 3 yes 3 yes 3 yes 3
Locating - - yes 2 yes 2 yes 2 yes 2
DECT XQ - - yes yes yes yes
UTF-8 and
alphanumeric dialing
support - - - - yes yes
SIP–DECT XML
terminal API - - - - yes yes
CAT-iq 1.0 / Aastra
Hi-Q™ audio
technology - - - - yes
4
yes
4
1 There must be at least one RFP L35/36/37 IP or RFP L43 WLAN to host the OMM (2nd
RFP for OMM standby).
2
The feature requires a license and is not available for L-RFP installations which are using
built-in licenses.
3 This feature requires a license for standard RFP installations. There is a built-in license for
L-RFP installation.
4
The feature is available with the new RFP (L) 35/36/37 IP and RFP (L) 43 WLAN and the
Aastra 650c handset (or other CAT-iq-capable devices). The feature is enabled per site and
requires that the RFPs are configured in the same site and cluster.