AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 210)

SIP–DECT OM System Manual Release 3.0 10 Maintenance
Aastra depl-1624/1.0 Page: 210 (241)
10.3.5.3 OMM Console On Linux x86 Server
You can call the OMM console on the Linux x86 server which runs the OMM using the
“ommconsole” command. Log on as user root as it is necessary to install and/or update
OMM.
IMPORTANT : If you not login as root to open the OMM console then the path to
ommconsole is not set and you have to enter the whole path
“/usr/sbin/ommconsole” to start the OMM console.
10.3.5.4 RFP Console Commands
If you type ip_rfpconsole you are able to use the following commands on each RFP:
Command Description
? Displays Command Help Table
help Displays Command Help Table
logger Send a string to the syslog daemon
deftrc Resets all trace settings to default
dsp Shows channel config
dump Creates system state dump file /tmp/sys_dump.txt.gz
mem Show memory and heap
exit Leave this console
heap Shows heap buffer statistics
lec Adjust linear echo canceler parameters
media Display state of media channels
mutex Lists all created MXP mutexes
omms Shows connection status to OMM(s)
queues Lists all created MXP queues
reset Resets the IPRFP application
resume Resume bmc activity
rsx Allows RSX connection to BMC via TCP
sem Lists all created MXP semaphores
spy Set/display spy levels: [ ]
suspend Suspend bmc activity
tasks Lists all running MXP tasks
voice Displays the state of voice handling
wlan Configure wlan card on cmdline
runtime Report the process runtime