AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 87)

SIP–DECT OM System Manual Release 3.0 7 OMM Web Service
Aastra depl-1624/1.0 Page: 87 (241)
3 You can specify different authentication/encryption settings for each SSID section. For
example, you can use WPA / Pre-shared key with different passwords.
Note, that some configuration combinations are incompatible with multiple SSIDs. For
example, the wireless hardware only manages a single WEP encryption key. Also, some
features apply to all defined SSIDs, this includes the
MAC access filters list.
You can edit the MAC access filters list via the MAC access filters tab on the WLAN profile
page.
•
You can import a prepared list of MAC addresses (*.txt. file, one line per MAC address)
Use the
Browse button to select the file from the file system. Afterwards press the Import
button.
•
To configure single MAC addresses, use the New button in the General settings section.
Enter the address in the following New MAC access filter dialog.
•
To delete a single MAC address, click on the icon left behind the address entry. Use
the Delete all button to delete the entire list.
•
Using the Save button you can export the MAC address filter list.
The Associate column indicates for each MAC address if the respective WLAN client is
currently connected to the WLAN.
7.8.1.2 Deleting WLAN Profiles
To delete an existing WLAN profile:
1 You cannot remove WLAN profile that is in use. To remove a currently used WLAN profile,
you need to select another WLAN profile for all assigned RFPs first (see chapter 7.6.3.
2 On the WLAN profiles page click on the icon next to the profile entry.
The Delete WLAN profile? dialog opens showing a summary of the WLAN profile’s
configuration.
3 Press the Delete button.