AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 235)

SIP–DECT OM System Manual Release 3.0 11 Appendix
Aastra depl-1624/1.0 Page: 235 (241)
11.9 Protocols and Ports
Protocol OpenMobility Manager
Server port Client port
HTTPS server tcp server 443 or as configured any
HTTP server (redirect
to https) tcp server 80 or as configured any
HTTP/HTTPS client
for the SIP–DECT
XML terminal
interface tcp 80/443 > 1024
RFP control protocol tcp server 16321 any
OMM Standby tcp server 16322 any
OM AXI tcp server 12622 any
DECTnet monitor tcp server 8106 any
LDAP tcp client 389 or as configured >=1024 (see note)
TFTP client udp 69 / given by server >=1024 (see note)
HTTP client tcp 80 or as configured >=1024 (see note)
HTTPS client tcp 443 or as configured >=1024 (see note)
explicit FTPS client tcp 21 or as configured >=1024 (see note)
implicit FTPS client tcp 990 or as configured >=1024 (see note)
OM AXI server TCP tcp server 12621 any
OM AXI server TLS tcp server 12622 any
SIP udp 5060 as configured
Telnet (OMM
console, Linux x86
server based OMM
only) tcp server localhost 8107 localhost any
Note: Unbound ports start at port 1024.