AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 170)

SIP–DECT OM System Manual Release 3.0 9 Configuration und Administration Aspects
Aastra depl-1624/1.0 Page: 170 (241)
RFP (L) 32/34 IP, RFP 32/34 NA, RFP (L) 42 WLAN
The following table illustrates the different meaning of the LEDs while the booter is active.
LED1 (INFO) LED2 (OMM /
SYSTEM)
LED3
(DECT)
LED4
(WLAN)
Booter cont. Power connected
cont. cont. cont. cont.
Wait for OMM Configurator
Input
1s 1s DHCP
1,9s 0,1s cont. cont. cont.
DHCP failed, wait for OMM
Configurator Input
0,25s 0,25s TFTP download after DHCP
0,25s 0,25s cont.
TFTP download after local
configuration
0,25s 0,25s cont.
TFTP download after DHCP
Multicast
0,25s 0,25s cont. cont.
TFTP download after local
configuration and multicast
3,9s 0,1s cont. cont. cont.
TFTP failed, wait for OMM
Configurator Input
Now, the kernel / application is running: LED1 will never be RED
9.5.5.2 Application LED Status
The following tables illustrate the different meaning of the LEDs while the application is
starting or active.
RFP (L) 35/36 IP, RFP (L) 43 WLAN
LED1 (INFO) LED2 (OMM /
SYSTEM)
LED3 (DECT) LED4 (WLAN)
Kernel cont.
kernel boot phase
(inflator, …)
RFPM 1s 1s DHCP phase
1,85s 0,1s
DHCP failure (idle
loop)
0,5s 0,5s
obtaining external
configuration
0,85s 0,1s
external configuration
failure
cont. Ready
1,85s 0,15s
Up&Running + RFP
houses OMM