ZyXEL Communications P-2602HWLNI - Manual (Page 84)

Chapter 5 Bandwidth Management Wizard
P-2602HWLNI User’s Guide
84
Figure 40 Wizard: Welcome
3 Select Active to allocate bandwidth to packets based on the packet size.
Figure 41 Bandwidth Management Wizard: General Information
The following fields describe the label in this screen.
4 Follow the on-screen instructions and click Finish to complete the wizard setup and save
your configuration.
Table 16 Bandwidth Management Wizard: General Information
LABEL DESCRIPTION
Active Select the Active check box to have the ZyXEL Device apply bandwidth
management to traffic going out through the ZyXEL Device’s WAN, LAN or WLAN
port based on the packet size.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.