ZyXEL Communications P-2602HWLNI - Manual (Page 198)

Chapter 11 Voice
P-2602HWLNI User’s Guide
198
7 If you want to separate the activated three-way conference into two individual
connections again, press the flash key. This time the party B is on-line and party A is on
hold.
11.15 Phone Region Screen
Use this screen to maintain settings that depend on which region of the world the ZyXEL
Device is in. To access this screen, click VoIP > Phone > Region.
Figure 111 VoIP > Phone > Region
Each field is described in the following table.
11.16 Speed Dial
Speed dial provides shortcuts for dialing frequently used (VoIP) phone numbers. You also
have to create speed-dial entries if you want to make peer-to-peer calls or call SIP numbers
that contain letters. Once you have configured a speed dial rule, you can use a shortcut (the
speed dial number, #01 for example) on your phone's keypad to call the phone number. Use
this screen to add, edit, or remove speed-dial numbers for outgoing calls. To access this screen,
click VoIP > Phone Book > Speed Dial.
Table 72 VoIP > Phone > Region
LABEL DESCRIPTION
Region Settings Select the place in which the ZyXEL Device is located.
Call Service Mode Select the mode for supplementary phone services (call hold, call waiting, call
transfer and three-way conference calls) that your VoIP service provider supports.
Europe Type - use supplementary phone services in European mode
USA Type - use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact your VoIP
service provider.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Cancel Click this to set every field in this screen to its last-saved value.