ZyXEL Communications P-2602HWLNI - Manual (Page 204)

Chapter 11 Voice
P-2602HWLNI User’s Guide
204
11.19 SIP Prefix Screen
The SIP prefix screen allows you to set up numbers you dial on your phone to specify which
SIP account you want to use for a call. If you dial only the phone number (no prefix number)
the ZyXEL Device uses default SIP settings to make the call.
Click VoIP > Phone Book > SIP Prefix. The following screen displays.
Name Type a name for the associated telephone number.
TEL Type the telephone number you want to add to a group.
Group Select a group for the telephone number you entered. You can select Family,
Workmate, Friend or VIP.
You can also select distinctive rings based on whether a call comes from the
registered SIP accounts, the PSTN line, or another phone connected to the ZyXEL
Device (internal).
Note: The ZyXEL Device will check whether the incoming phone
number is part of any of the groups assigned above before
checking the incoming line.
SIP1 to SIP 10 Select a ring for each registered SIP account.
PSTN Call Select a ring for PSTN calls.
Internal Call Select a ring for internal calls.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 75 Phone Book > Distinctive Ring
LABEL DESCRIPTION