ZyXEL Communications P-2602HWLNI - Manual (Page 357)

Chapter 23 Remote Management Configuration
P-2602HWLNI User’s Guide
357
23.14 Secure Telnet Using SSH Examples
This section shows two examples using a command interface and a graphical interface SSH
client program to remotely access the ZyXEL Device. The configuration and connection steps
are similar for most SSH client programs. Refer to your SSH client program user’s guide.
23.14.1 Example 1: Microsoft Windows
This section describes how to access the ZyXEL Device using the Secure Shell Client
program.
1 Launch the SSH client and specify the connection information (IP address, port number
or device name) for the ZyXEL Device.
2 Configure the SSH client to accept connection using SSH version 1.
3 A window displays prompting you to store the host key in you computer. Click Yes to
continue.
Figure 206 SSH Example 1: Store Host Key
Enter the password to log in to the ZyXEL Device. The SMT main menu displays next.
23.14.2 Example 2: Linux
This section describes how to access the ZyXEL Device using the OpenSSH client program
that comes with most Linux distributions.
1 Test whether the SSH service is available on the ZyXEL Device.
Access Status Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secure Client IP A secure client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 145 ADVANCED > REMOTE MGMT > SSH
LABEL DESCRIPTION