ZyXEL Communications P-2602HWLNI - Manual (Page 149)

Chapter 9 Wireless LAN
P-2602HWLNI User’s Guide
149
Figure 84 Wireless LAN > WDS
The following table describes the fields in this screen.
9.10.1 Static WEP
Choose Static WEP from the Security Mode list.
Table 47 Wireless LAN > WDS
LABEL DESCRIPTION
Remote Bridge MAC Address
# This is the index number of the individual WDS link.
Active Select this to activate the link between the ZyXEL Device and the peer device
to which this entry refers. When you do not select the check box this link is
down.
MAC Address Type the MAC address of the peer device in a valid MAC address format, six
hexadecimal character pairs, 12:34:56:78:9a:bc, for example.
Security
Security Mode Select one of the security settings.
•
No Security
• Static WEP
• WPA-PSK
• WPA2-PSK
If you select No Security, the data sent between APs is not encrypted.
Anyone can read it. See the following sections for more information.
Note: Other APs must use the same encryption method on
security settings to enable WDS security.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to return to the previous screen.