Phone usage, 1 dialing a telephone number, 2 using speed dial to dial a telephone number – ZyXEL Communications P-2602HWLNI User Manual
Page 227: 3 internal calls, Chapter 13 phone usage, Ng internal calls, refer to, Section
P-2602HWLNI User’s Guide
227
C
H A P T E R
13
Phone Usage
This chapter describes how to use a phone connected to your ZyXEL Device for basic tasks.
13.1 Dialing a Telephone Number
The PHONE LED turns green when your SIP account is registered. Dial a SIP number like
“12345” on your phone’s keypad.
Use speed dial entries (see
) for peer-to-peer calls or SIP numbers
that use letters. Dial the speed dial entry on your telephone’s keypad.
Use your VoIP service provider’s dialing plan to call regular telephone numbers.
13.2 Using Speed Dial to Dial a Telephone Number
After configuring the speed dial entry and adding it to the phonebook, press the speed dial
entry’s key combination on your phone’s keypad.
13.3 Internal Calls
When you have more than one phone connected to the ZyXEL Device’s phone ports, you can
make internal calls from a phone connected to one port to a phone connected to another.
"
When you have more than one phone connected to a single analog PHONE
port, they behave exactly the same as one another. The extension number you
give to the port applies to all the phones connected to it. However, when you
have multiple ISDN phones connected to the ISDN port, each can have it own
extension number. See
for more information.
The ZyXEL Device supports the following functions for internal calls:
• Phone Book
• Call Transfer
• Call Forwarding