ZyXEL Communications P-2602HWLNI - Manual (Page 152)

Chapter 9 Wireless LAN
P-2602HWLNI User’s Guide
152
The following table describes the labels in this screen.
9.10.3 WPA2-PSK
Choose WPA2-PSK from the Security Mode list.
Figure 88 Wireless LAN > WDS > WPA2-PSK
Table 49 Wireless LAN > WDS > WPA-PSK
LABEL DESCRIPTION
Security Mode Choose WPA-PSK from the drop-down list box.
Pre-Shared Key The Pre-Shared key (PSK) is used to encrypt data. All the wireless APs (including
the ZyXEL Device) must use the same WPA Pre-Shared Key for data
transmission.
When you choose this, the Pre-Share Key you enter must have the following
format:
•
Sixteen-character common key (common): all APs in the WDS share the
same common key. All ASCII characters (including spaces and symbols) are
allowed.
• Eight-character transmission key (tx): this must be the same as the next AP’s
reception key. All ASCII characters (including spaces and symbols) are
allowed.
• Eight-character reception key (rx): this must be the same as the next AP’s
transmission key. All ASCII characters (including spaces and symbols) are
allowed.
• The common, transmission key and reception key are connected by '+' the
plus sign.