8 bandwidth monitor, Figure 191 bandwidth management: monitor – ZyXEL Communications P-2602HWLNI User Manual
Page 337
Chapter 21 Bandwidth Management
P-2602HWLNI User’s Guide
337
21.8 Bandwidth Monitor
To view the ZyXEL Device’s bandwidth usage, click Advanced > Bandwidth MGMT >
Monitor. The screen appears as shown. Select an interface from the drop-down list box to
view the bandwidth usage of its bandwidth rules. The gray section of the bar represents the
percentage of unused bandwidth and the blue color represents the percentage of bandwidth in
use.
Figure 191 Bandwidth Management: Monitor
Source Port
Enter the port number of the source. See
for some
common services and port numbers.
Protocol
Select the protocol (TCP or UDP) or select User defined and enter the protocol
(service type) number. 0 means any protocol number.
Back
Click Back to go to the previous screen.
Apply
Click Apply to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 136 Bandwidth Management Rule Configuration (continued)
LABEL
DESCRIPTION