ZyXEL Communications P-2602HWLNI - Manual (Page 228)

Chapter 13 Phone Usage
P-2602HWLNI User’s Guide
228
• Follow Me
• Call Pickup
"
To use these supplementary functions for internal calls, you have to configure
the VoIP > Phone > Ext. Table first.
13.3.1 Phone Book
You can assign each phone connected to the ZyXEL Device an extension number and make
internal calls between these phones. You can also call a group of phones that share the same
group number. For information on how to configure extension numbers and group numbers,
refer to
Section 11.12 on page 191 .
"
If you don’t configure the extension table, you can press “####” on your
phone’s keypad to call all the phones connecting to the ZyXEL Device’s
phone ports.
13.3.2 Call Transfer
Take the following steps to transfer an ongoing call to another extension number.
1 Press your phone’s flash key to put the caller on hold.
2 When you hear the dial tone, dial “*98#” followed by the number to which you want to
transfer the call.
3 After you hear the ring signal or the second party answers it, hang up the phone.
13.3.3 Call Forwarding
You can set the ZyXEL Device to forward calls to a specific extension number, either
unconditionally (always), when your number is busy, or when you do not answer. You can also
forward incoming calls from one specified number to another. Configure your call-forwarding
rules in the VoIP > Phone > Ext. Table
> Advanced screen.
13.3.4 Follow Me
When you have to leave your seat temporarily, you can set the ZyXEL Device to
unconditionally forward calls to another specific extension number. You can set up “follow
me” either on your phone, or on the phone to which you want calls forwarded.
• Local setting (when you are at your phone):
When you hear the dial tone, dial “*01” followed by the number to which you want the
call to be forwarded. When you do not need the follow me function, dial “#01” to cancel
this rule.