4 wpa(2) authentication screen, Figure 72 wireless: wpa(2), Table 40 wireless: wpa(2) – ZyXEL Communications P-2602HWLNI User Manual
Page 138

Chapter 9 Wireless LAN
P-2602HWLNI User’s Guide
138
9.5.4 WPA(2) Authentication Screen
In order to configure and enable WPA Authentication; click the Wireless LAN link under
Network to display the Wireless screen. Select WPA or WPA2 from the Security Mode list.
Figure 72 Wireless: WPA(2)
The following table describes the wireless LAN security labels in this screen.
Table 40 Wireless: WPA(2)
LABEL
DESCRIPTION
Security Mode
Choose WPA or WPA2 from the drop-down list box.
WPA Compatible
This field is only available for WPA2. Select this if you want the ZyXEL Device to
support WPA and WPA2 simultaneously.
ReAuthentication
Timer (in seconds)
Specify how often wireless stations have to resend usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
The default time interval is 1800 seconds (30 minutes).
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server
has priority.
Idle Timeout
The ZyXEL Device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the
username and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).