Toshiba T2N - Manual (Page 33)

1.System Configuration
18 PROSEC T2N
Type Description Specification
AO31 Analog output
(8bit) 2-channel (not isolated between channels),
1-5V/0-10V/4-20mA, 8bit resolution
AO22 4-channel (not isolated between channels),
4-20mA /1-5V,12bit resolution
AO32
Analog output
(12bit)
4-channel (not isolated between channels),
-10V - +10V,12bit resolution
PI21 Pulse input 1-channel (two phase, with zero marker),
5/12Vdc, 100kpps (max), 24bit counter
MC11 Single-axis
positioning 1 axis, 100kpps(max.), position data memory
capacity 64 points
CF211 Serial Interface RS-232C 1port,
Common memory 160W
×
2
1.8
Data Transmission By applying the following 4 types of data transmission module according to the
Module system requirements, the T2N can configure the flexible and efficient control
systems.
•
TOSLINE-F10
PLC to PLC data linkage and remote I/O systems are configured by the
TOSLINE-F10 data transmission equipment.
Up to 8 T2 stations can be mounted in any slots, in the same way as I/O modules.
MS211/RS211
(High-speed setting)
MS211/RS211
(Long-distance setting)
Topology Bus (twisted-pair cable)
Transmission speed 750kbps 250kbps
Transmission Distance 500m 1km
Number of stations max. 32stations
Transmission capacity 32 words (L/LW)
Response speed 7ms(when 32 words) 12ms(when 32 words)
For detailed specifications of each I/O module, see Section 2.3 I/O Module
Specifications.
NOTE