Toshiba T2N - Manual (Page 136)

5.RAS Functions
User’s manual 123
(4) Event
Indicates the what sort of error has been detected. (System power on
indicates when system power is turned on and system power off when
system power is turned off.)
(5) Count
Indicates the number of times the error was detected. For example, an
error is detected during a process, the retry is repeated 3 times, the
malfunction does not change and it goes to error down. This is indicated as
a count of 4 and DOWN is displayed under the Mode.
(6) Information 1, Information 2, Information 3
Indicates supplementary information regarding malfunction. For example,
with an I/O malfunction the I/O module position (unit No, slot No) where
the malfunction occurred and the read/write register address etc are
indicated.
(7) Mode
Indicates the actual mode when the error was detected. Also displays
DOWN when error down occurs. On the mode display, INIT. indicates
system initialization after power is turned on.
*) Refer to Part 1 section 6 for display details of detected errors and methods
of proceeding.