Quantum Data 802BT User Manual

Page 89

802BT/802R Video Test Generator User Guide

Note:

The card you need is a Type 1, Battery Backed RAM PCMCIA card with at least

2 MB of storage. These cards are available from synchrotech P/N PCM-SRW-AM002

2MB. Flash or compact type memory cards will not work.

2. Use one of the following procedures to configure the generator to use a format with the

same pixel depth as the image:

•

Select a built-in format with the appropriate pixel depth.

•

Create a format with the appropriate pixel depth.

•

Establish a terminal session with the generator and enter the following commands

to set the pixel depth to 32-bit (24-bit TrueColor) or 8-bit:

•

Hold down the

key while pressing and releasing the

key to toggle the pixel

depth between 8 and 32-bit pixel depths.

3. Using the

Image

knob, select the CardBMP image, or enter this command:

CardBMP;

The image appears on the display.

4. To view an image from a different card, switch the cards, and then re-select the

CardBMP image.

This manual is related to the following products: