Quantum Data 802BT - Manual (Page 724)

714 Appendix C Error Messages
2130 Horizontal active too small
The number of active pixels per horizontal scan line is less than the minimum supported
by the generator hardware configuration.
2140 Horizontal blanking too small
The video format’s horizontal blanking period expressed in microseconds and/or number
of pixel clock cycles is not supported by the generator hardware configuration.
2141 Horizontal blanking too small
Same as Error number 2140. Found in some firmware releases for different generator
hardware configurations.
2150 Horizontal blanking too small
Same as Error number 2140. Found in some firmware releases for different generator
hardware configurations.
2151 Horizontal total less than horizontal resolution
The video format’s total (active + blanked) number of pixel clock cycles per horizontal scan
line can not be less than the number of active pixels per scan line.
2152 Horizontal resolution too large or Horizontal blanking too small
Same as Error number 2140. Found in some firmware releases for different generator
hardware configurations.
2155 Horizontal blanking too small
Same as Error number 2140. Found in some firmware releases for different generator
hardware configurations.
2180 Horizontal pulse width too small
The generator hardware configuration does not support video formats having horizontal
sync pulse widths less than one pixel clock cycle long.
2181 Horizontal sync pulse width not even
Number of pixel clock cycles in the horizontal sync pulse width must be evenly divisible by
2 at the current pixel clock rate for the video format and generator hardware configuration.
2190 HSPW too small for HDTV sync
The generator hardware configuration does not support video formats having horizontal
sync pulse widths less than two pixel clock cycles long for the current video and HDTV
sync type selections.