Quantum Data 802BT User Manual
Page 727
802BT/802R Video Test Generator User Guide
717
2390
Vertical pulse too large for interlaced format
The vertical sync pulse width combined with the number of pre and post-equalization
pulses for an interlaced format is greater than the maximum supported by the generator
hardware configuration.
2391
Incompatible analog composite sync & digital composite sync types
The generator hardware configuration does not support the video format outputting both
analog composite sync and digital composite sync type selections at the same time.
2392
Incompatible analog composite sync & digital separate sync types
The generator hardware configuration does not support the video format outputting both
analog composite sync and digital separate sync type selections at the same time.
2393
Analog composite sync type not compatible with analog video type
The generator hardware configuration does not support the video format’s analog
composite sync type being added to the current analog video type.
2394
ACS available on green only
The generator hardware configuration supports adding analog composite sync to only the
green analog video output
2395
Sync type selection incompatible with analog video type selection
The video format’s analog video type selection requires the use of analog composite sync.
2396
Invalid analog composite sync type
The current firmware does not support the format’s analog composite sync type parameter
value (ASCT setting) or the generator hardware configuration does not support a video
format’s analog composite sync type for non-interlaced operation.
2397
Invalid digital composite sync type
The current firmware does not support the format’s digital composite sync type parameter
value (DSCT setting) or the generator hardware configuration does not support a video
format’s digital composite sync type for non-interlaced operation.
2398
Invalid digital separate sync type
The current firmware or generator hardware configuration does not support the format’s
digital separate sync type parameter value (DSST setting)
2399
Invalid sync type selection
The current firmware does not support the format’s active sync type selection (SSST
setting).