Quantum Data 802BT User Manual
Page 197
802BT/802R Video Test Generator User Guide
187
•
HdcpA2B
The image will indicate if the test passed or failed. If the test fails, see “
4. To test another device, connect the cable to the new device.
The HDCP test starts automatically.
To test HDCP with an HDMI device:
1. Hold down the
G
and
B
key while starting the generator put the generator in digital
friendly mode.
Alternatively, enter the following command:
2
2. Connect the HDMI transmitter on the generator to the device’s HDMI receiver.
3. Select the HdcpProd(uction) image.
The image will indicate if the test passed or failed. If the test fails, see “
This manual is related to the following products: