Quantum Data 802BT - Manual (Page 139)

802BT/802R Video Test Generator User Guide 129
Testing audio (HDMI only)
The HDMI analyzer can process audio data from an incoming HDMI signal. With this
capability, an HDMI source can be tested for its ability to successfully transmit audio
packets.
Testing HDMI transmit device audio capability
The 802 generator can monitor the audio content of the received HDMI signal.
To monitor audio content received from an HDMI transmitter:
1. Connect the HDMI transmit device to the HDMI Rx connector on the generator.
2. If necessary, set up the generator for HDMI output (see “ Setting up the generator for
HDMI operation ” on page 147).
3. Monitor the audio signal received on the HDMI Rx connector using an external audio
device (see “ Monitoring HDMI analyzer signal input ” on page 110.