Quantum Data 802BT - Manual (Page 722)

712 Appendix C Error Messages
2075 Analog composite sync type not supported
The video format’s analog video composite sync type selection is not supported by the
generator hardware configuration.
2076 Digital sync composite type not supported
The video format’s digital composite sync type selection is not supported by the generator
hardware configuration.
2077 Number of digital links not allowed
The number of serial digital video data links in the video format exceeds the number of
links supported by the current firmware.
2078 Digital sync separate type not allowed for HDTV formats
The generator hardware configuration does not support digital separate sync for the
specific video type selection in the video format
2079 Number of links not supported
The number of serial digital video data links in the video format exceeds the number of
links supported by the generator hardware configuration.
2080 Pixel rate too low
The video format’s total (active + blanked) number of pixel clock cycles per horizontal scan
line multiplied by the horizontal scan rate is less than the minimum pixel clock frequency
supported by the generator hardware configuration for the format video type.
2082 Number of bits not allowed
The generator hardware configuration does not support the number of data bits per color
for the serial digital video type selected in the video format.
2083 Invalid quantizing mode
An invalid value has been specified for the DVQM parameter.
2084 Invalid Pixel Repetition
In digital mode, double clocking is not supported for this specific hardware. This error may
be the result of an older FPGA or hardware.
2085 Invalid Sampling Mode
The value specified for DVSM is not valid and is inconsistent with the setting of DVST.
2090 Horizontal total not even
The generator hardware configuration does not support interlaced video formats with a
total (active + blanked) number of pixel clock cycles per horizontal scan line that is not
evenly divisible by 2.