Quantum Data 802BT - Manual (Page 726)

716 Appendix C Error Messages
2250 Vertical total too small for interlaced format
The total (active + blanked) number of horizontal scan lines per frame is less than the
minimum number supported by the generator hardware configuration.
2270 Vertical total is even
The generator hardware configuration does not support interlaced scan video formats
having an even total (active + blanked) number of horizontal scan lines per frame.
2280 Vertical total too large
The total (active + blanked) number of horizontal scan lines per frame exceeds the
maximum limit for the generator hardware configuration.
2300 Vertical active too small
The active number of horizontal scan lines per frame of a progressive scan
(non-interlaced) video format is less than the minimum supported by the generator
hardware configuration.
2310 Vertical blanking too small
The number of blanked horizontal scan lines per frame for a progressive scan
(non-interlaced) video format is less than the minimum supported by the generator
hardware configuration.
2320 Vertical active too small for interlaced format
The active number of horizontal scan lines per frame of an interlaced video format is less
than the minimum supported by the generator hardware configuration.
2321 Vertical active not even
The generator hardware configuration does not support interlaced scan video formats
having an odd active number of horizontal scan lines per frame.
2330 Vertical blanking too small for interlaced format
The number of blanked horizontal scan lines per frame for an -interlaced video format is
less than the minimum supported by the generator hardware configuration.
2350 Vertical pulse too small
The vertical sync pulse width is less than the minimum supported by the generator
hardware configuration.
2370 Vertical pulse too large
The vertical sync pulse width is greater than the maximum supported by the generator
hardware configuration.