Roland RS-70 - Manual (Page 70)

70
Using the sequencer to create patterns (Pattern mode)
Undo/redo the previous recording
operation
If you are not satisfied with the previous realtime-recording, you can
return to the state prior to recording (
Undo ), or cancel ( Redo ) the
Undo operation you executed.
Undo
1. While the pattern is stopped, press [ERASE/UNDO].
If you are in a state where Undo is possible, the following
display will appear.
fig.r06-14_40
2. Press [ENTER] to execute the Undo.
If you decide to cancel, press [EXIT].
If Undo cannot be performed, a display like the following will
appear.
fig.r06-15_40
Redo
1. After performing Undo, press [ERASE/UNDO].
If you are in a state where Redo is possible, the following display
will appear.
fig.r06-16_40
2. Press [ENTER] to execute the Redo.
If you decide to cancel, press [EXIT].
* If you had previously been editing a pattern, those actions will be the
object of Undo/Redo.
Various settings for realtime
recording
In the Recording Standby (p. 68) states, you can press [PARAM] to
specify the recording mode and make quantization settings. The
parameters you can set are organized into the following three
groups.
• REC MODE (Recording Mode):
Select how recording is to take place (p. 71).
• QUANTIZE (Recording Quantize):
Correct the timing of your playing as you record (p. 71).
• REC SELECT (Recording Select):
Select the music data to be recorded (p. 72).
How to select recording parameters
fig.r06-19
REC MODE
PAGE/
CURSOR [ ] PAGE/
CURSOR [ ]
PAGE/
CURSOR [ ] PAGE/
CURSOR [ ]
PAGE/
CURSOR [ ] PAGE/
CURSOR [ ]
PAGE/
CURSOR [ ] PAGE/
CURSOR [ ]
PAGE/
CURSOR [ ] PAGE/
CURSOR [ ]
REC QUANTIZE
PAGE/
CURSOR [ ] PAGE/
CURSOR [ ]
PAGE/
CURSOR [ ] PAGE/
CURSOR [ ]
PAGE/
CURSOR [ ] PAGE/
CURSOR [ ]
REC SELECT
[SHIFT]
+
PAGE/
CURSOR [ ]
[SHIFT]
+
PAGE/
CURSOR [ ]
[SHIFT]
+
PAGE/
CURSOR [ ]
[SHIFT]
+
PAGE/
CURSOR [ ]
RS-70_e3.book 70 ページ ２００３年６月１８日 水曜日 午後１２時５４分