Roland RS-70 - Manual (Page 110)

110
Adding effects
43: SLICER
By applying successive cuts to the sound, this effect produces what
are heard as backing phrases, even though you’ve played something
much simpler. This is especially effective when applied to sustain-
type sounds.
fig.MFX-43
44: TREMOLO
Tremolo cyclically modulates the volume to add tremolo effect to the
sound.
fig.MFX-44
Low Gain -15– +15 [dB] Adjusts the gain of the low fre-
quency.
High Gain -15– +15 [dB] Adjusts the gain of the high fre-
quency.
Output MONO, STE-
REO Specifies how the sound will be
output.
With a setting of “MONO,” the
output sound will be monaural.
Level # 0–127 Specifies the output volume
from the Lo-Fi effect.
Parameter Value Description
Timing Pattern 1–34 Selects a pattern to specify the
timing at which the sound will
be cut.
Accent Pattern 1–16 Specifies the location of the ac-
cents.
Accent Level # 0–127 Adjusts the volume of the ac-
cents.
As this setting is increased, the
accent will be more pronounced.
Attack 0–127 Adjusts the attack time of an in-
put sound.
As this setting is increased, the
attack will become faster.
Rate # 0.05–10.00 [Hz],
note *2 This sets the period for the pat-
tern.
Reset OFF, ON Specifies whether the timing
pattern at which the sound is cut
will be reset (ON) or not (OFF)
when you play a sound.
While the sequencer is playing,
the period for the pattern is not
reset even if you set this ON.
Level 0–127 Adjusts the output level.
Parameter Value Description
L in
R in
L out
R out
Slicer
Slicer
Parameter Value Description
Mod Wave TRI, SQR, SIN,
SAW1/ 2 TRI: The sound will be modulat-
ed like a triangle wave.
SQR: The sound will be modu-
lated like a square wave.
SIN: The sound will be modulat-
ed like a sine wave.
SAW1/2: The sound will be
modulated like a sawtooth
wave. The teeth in SAW1 and
SAW2 point at opposite direc-
tions.
Rate # 0.05–10.00 [Hz],
note *2 Adjusts the frequency (speed) of
the change.
Depth # 0–127 Sets the depth to which the ef-
fect is applied.
Reset OFF, ON This setting determines whether
the period for the pattern is reset
(ON), or not (OFF) when sounds
are played.
While the sequencer is playing,
the period for the pattern is not
reset even if you set this ON.
Low Gain -15– +15 [dB] Adjusts the gain of the low fre-
quency.
High Gain -15– +15 [dB] Adjusts the gain of the high fre-
quency.
Level 0–127 Adjusts the output level.
L in
R in
L out
R out
Tremolo
2-Band EQ
2-Band EQ
Tremolo
SAW1 SAW2
RESET
LEVEL
RS-70_e3.book 110 ページ ２００３年６月１８日 水曜日 午後１２時５４分