Roland RS-70 - Manual (Page 14)

14
Panel descriptions
PAGE/CURSOR [ ]/[ ] /
JUMP [ ]/[ ] buttons
PAGE/CURSOR: Use these buttons to move between pages or to
move the cursor (p. 53).
JUMP: In grouped pages, you can hold down [SHIFT]
and use these buttons to move between groups
(p. 53).
While one of these buttons is first held down and the other is
pressed, the page or cursor then moves rapidly.
[EXIT] button
Press this button to return to the main screen of a mode, or when you
want to cancel the current operation.
[ENTER] button
Use this button to finalize a value or execute an operation.
[SHIFT] button
By holding down this button and pressing another button, you can
access a secondary function of that button (printed below the button
in square brackets).
[TAP TEMPO] / [SMF PLAYER] button
TAP TEMPO: Adjusts the tempo according to the timing at which
you tap this button. You can also use VALUE [-]/
[+] to adjust the tempo if desired (p. 67).
SMF PLAYER: You can hold down [SHIFT] and press this button
to select SMF Player mode (p. 47).
H
QUICK SEQ (Quick Sequencer) section
* The buttons in this section are generally valid in Pattern mode, Song
mode and SMF Player mode.
[ ] (Recording) button / STEP button
: Press this to begin pattern or song recording.
STEP: By holding down [SHIFT] and pressing this button, you
can enter Step Recording (p. 75).
[ERASE/UNDO] button
This button erases recorded data or cancels the pattern edit
operation. During loop recording, you can use this to selectively
erase data just like a pencil eraser (p. 69). Immediately after
recording is finished, you can press this button to erase (undo) the
recording itself (p. 70). If you press it again, the Undo will be
cancelled (redo).
[ ] (Backward) button
Press this to “rewind” a pattern or song. If you hold down this
button as you press [
], the pattern or song will “rewind” faster.
Or, if you hold down [SHIFT] while using this button, the value will
change in larger steps (p. 66, p. 114).
Press this button while holding down [ ] to return to the
beginning of the pattern or song.
[ ] (Forward) button/REST button
: Use this button to fast-forward a pattern or song. If you
hold down this button as you press [ ], the pattern
or song will fast-forward faster. Or, if you hold down
[SHIFT] while using this button, the value will change
in larger steps (p. 66, p. 114).
REST: During step recording, press this button to input a rest
(p. 76).
[ ] (Stop) button/MICRO EDIT button
: Press this button to stop playback of the pattern or
song.
MICRO EDIT: You can hold down [SHIFT] and press this button to
use the Microscope edit function (p. 76).
[ ] (Play) button/TIE button
: Press this button to start playback of the pattern or
song.
TIE: During step recording, press this button to input a tie
(p. 76).
I
PATCH MODIFY section
[DESTINATION TONE] button
Selects either UPPER or LOWER as the tone to be edited.
Patch Modify select button
Selects whether the three knobs located at the right will edit the
envelope or the balance and LFO.
• If envelope is selected (ENV indicator lit)
[ATTACK] knob
Adjusts the attack speed of the sound (p. 32).
[DECAY] knob
Adjusts the speed at which the sound decays while you
continue holding the key (p. 32).
[RELEASE] knob
Adjusts the length of the release after you take your finger off
the key (p. 32).
RS-70_e3.book 14 ページ ２００３年６月１８日 水曜日 午後１２時５４分