NEC 140He - Manual (Page 92)

4-20
Option Parameter Description Your Setting
10 minutes
20 minutes
60 minutes
120 minutes
Hot Key
(CTRL+ALT+) [L]
Z Specify the key with which the secure mode is started. Press
the selected key with the Ctrl and Alt pressed to start the
secure mode.
Secure Mode Boot [Disabled]
Enabled
Specify whether the server is operated in the secure mode at
the start of the server.
Video Blanking [Disabled]
Enabled Specify whether the monitor is disconnected if the server is
entered into the secure mode.
Floppy Write
Protect [Disabled]
Enabled Specify whether data write to the floppy disk inserted into the
floppy disk drive is enabled or disabled in the secure mode.
Power Switch
Inhibit [Disabled]
Enabled Specify whether the power switch is enabled or disabled. If this
item is set to "Enabled," the power cannot be turned off by
using the POWER switch (including the forced shutdown). The
system cannot also enter the power saving mode by pressing
the SLEEP switch.
[ ]: Factory-set
NOTE: The Secure Mode is used to restrict access from unauthorized users. In the Secure
Mode, the POWER switch, SLEEP switch, RESET switch, keyboard and mouse are
disabled. The lamps on the keyboard flash in order from the ScrollLock lamp, the
CapsLock lamp, and the NumLock lamp. To resume server operation in the normal state
from the Secure Mode, enter the user password from the keyboard and press Enter key.