NEC 140He - Manual (Page 77)

4-5
DIMM #4
DIMM #3
DIMM #2
DIMM #1
To enable the memory mirroring feature or memory RAID feature
Select [Advanced] - [Memory Configuration] - [Memory RAS Feature], and select [Mirror] or [RAID].
Processor
To enable the processor degradation feature
Select [Advanced] - [Memory/Processor Error] - [Halt].
To check the installed processor status
Select [Main] - [Processor Settings] and check the status indications.
The on-screen processor numbers and socket locations on the IO board are associated as shown in the
following figure.
To clear the processor error information
Select [Main] - [Processor Settings] - [Processor Retest] - [Yes] and reboot.
Select [Server] - [Clear FRU LED] - [Yes] and reboot.*
* Only when [Server] - [FRU LED Feature] - [Enabled] has been selected.
Processor #3
Processor #4 Processor #2
Processor #1