NEC 140He - Manual (Page 147)

4-75
No Error Message What to do
5 The required XML tag is not
found. The BMC configuration file may be corrupted. Check the file.
6 Failed to write the file. The BMC configuration file is not saved successfully. Change the
location to save the file and try again.
7 Invalid user name You can use only alphanumeric characters, minus sign (–), and
underscore (_) for a user name. A user name should be 32 characters or
less.
8 The user name is too long A user name should be 32 characters or less.
9 The password is too long. Use 16 or less characters.
10 Passwords are not matched. Again, input passwords.
11 Invalid HTTP port number You can use only numeric values.
12 Invalid SSL port number You can use only numeric values.
13 HTTP/SSL should not be the
same. The same port number cannot do them. Specify different value.
14 Invalid login attempt period You can use only numeric values.
15 Invalid failed login attempts You can use only numeric values.
16 Invalid account lock period You can use only numeric values.
17 Invalid IP address Use numerals and periods to specify an IP address.
18 Invalid subnet mask Use numerals and periods to specify a subnet mask.
19 Invalid default gateway Use numerals and periods to specify a default gateway.
20 Invalid DNS server IP address Use numerals and periods to specify the IP address of DNS server.
21 Invalid host name You can use only alphanumeric characters, minus sign (–), and
underscore (_) for a host name. A host name should be 64 characters or
less.
22 Invalid domain name You can use only alphanumeric characters, minus sign (–), and
underscore (_) for a domain name. A domain name should be up to 256
characters.
23 The SMTP server address is too
long. Specify within 256 characters.
24 Invalid SMTP port number. You can use only numeric values.
25 Invalid retry count You can use only numeric values.
26 Invalid retry interval You can use only numeric values.
27 "To" is too long. Specify within 256 characters.
28 "From" is too long. Specify within 256 characters.
29 "Subject" is too long. Specify within 512 characters.
30 The message is too long. The message should be up to 4064 characters.
31 Failed to open the file: The specified file may not exist. Check the file name.
32 Failed to close the file: The specified file may be corrupted.
33 Can’t open the file: The specified file may not exist. Check the file name.
34 Timeout has occurred. Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
Firmware update errors
No Error Message What to do
1 There are uncompleted update
images on BMC as follows: Reboot the server and complete the update.
2 Failed to acquire status of the
update area. The network may be busy. Try again. If the error persists, contact your
service representative because a failure may have occurred in BMC.
3 Update data is too large: Some update files may be corrupted. Acquire update files again.
4 Failed to prepare update The network may be busy. Try again. If the error persists, contact your
service representative because a failure may have occurred in BMC.
5 Invalid file size: The update file may be corrupted. Acquire the update file again.
6 Could not find the revision
information: Some update files may be corrupted. Acquire update files again.
7 Failed to create rollback image. Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
8 Failed to erase. Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
9 Unsupported format version: Some update files may be corrupted. Acquire update files again.