NEC 140He User Manual

Page 114

4-42

Select ID-2/3 hard disks.

Same as for Channel-1 for ID-0/1, press Space in the status described in 2 to select Channel-1 for ID-2/3 and
then press Enter to determine the selection. ("ONLIN A02-01/02" is then displayed.)

Set logical drive.

Pressing F10 in the status described in 3 displays a screen shown below. Set each item. Then select "Advance
Menu" to display the "Advanced" sub menu screen.

The setting contents are shown below:

Setting item

Default (initial value)

Setting range

RAID

0, 1

Size

Full capacity (logical drive)

Full capacity

Stripe Size

64 KB

2/4/8/16/32/64/128

Write Policy

WRBACK

WRTHRU
WRBACK

Read Policy

NORMAL

NORMAL
READAHEAD
ADAPTIVE

Advanced

Cache Policy

Direct IO

Direct IO
Cache IO

Span

YES

CANSPAN (YES)
NOSPAN (NO)

– To open the "Advanced" sub menu screen from the "Logical Drive XX" menu screen, select "Advanced

Menu" and then press Enter. Press Esc to move to the "Logical Drive XX" menu screen. In this case, the
cursor moves to "Accept."