NEC 140He - Manual (Page 47)

2-19
EXPRESSBUILDER
The CD-ROM that comes with your server contains a setup utility called " EXPRESSBUILDER." When you have first
installed the server or append features to the server, use the EXPRESSBUILDER to set up your server.
Refer to Chapter 6 for details.
The major functions of the EXPRESSBUILDER are:
„ To install the Operating System.
"Express Setup" helps you to install Windows system. (See Chapter 5)
„ To diagnose the system.
EXPRESSBUILDER includes the System Diagnostics to check your server. (See Chapter 6)
„ To create a support disk.
Use this function to create the support disks used to boot the utilities from the floppy disk, or the OEM floppy
disk used for a manual installation of Windows. (See Chapter 6)
„ To update the BIOS.
Use this function to update the system BIOS or firmware of the server. (See Chapter 6)
„ To update the Windows System*
"Update Express5800 System" in Master Control Menu (Windows-based EXPRESSBUILDER feature)
updates several resources of Microsoft® Windows Server™ 2003 or Microsoft® Windows® 2000. (See
Chapter 6)
„ To install the utilities.
EXPRESSBUILDER CD-ROM includes some management software for Windows ( ESMPRO, DianaScope,
etc.) and maintenance utilities for DOS (System diagnostics, Off-line Maintenance Utility, etc.).
You can install the applications for Windows from Master Control Menu and install the utilities for DOS from
Tools menu. (See Chapter 6)
„ To read the online documents*
You can refer to the online documents from Master Control Menu. (See Chapter 6)
NOTE: Some features among those listed above can be used from the remote computer
via cross cable, modem, or LAN (remote console). See Chapter 6 for details.
* These functions are available under Windows system.