NEC 140He - Manual (Page 84)

4-12
PCI Configuration
Selecting "PCI Configuration" on the Advanced menu shows the following screen. Selecting an item on the screen
allows the proper submenu to appear.
See the table blow for the items.
Option Parameter Description Your Setting
PCI Slot 1-9
Option ROM [Enabled]
Disabled Disables/enables the Option ROM BIOS on the PCI bus.
When the graphic accelerator board is installed or the disk
array controller or SCSI controller boards to be installed
are connected to the hard disk in which operating system
is installed, set this item to "Enabled." When the LAN
controller board with installation of the option ROM BIOS
is used but the board does not provide network booting,
set this item to "Disabled."
[ ]: Factory-set