Graphics accelerator driver – NEC 140He User Manual
Page 163
5-13
Installing Disk Array Controller Driver (SecuRAID 321)
To additionally install the SecuRAID 321 in a system containing Windows Server 2003, connect the controller and
install the driver as follows:
1.
When the [Found New Hardware Wizard] dialog box appears, click [Next].
2.
When the [Install Hardware Device Drivers] dialog box appears, select [Search for a suitable driver for my
device (Recommended)], and click [Next].
3.
When the [Locate Driver Files] dialog box appears, select [Floppy disk drives], insert "Windows Server 2003
OEM-DISK for EXPRESSBUILDER" into the floppy disk drive, and click [Next].
4.
When the [Driver Files Search Results] dialog box appears, click [Next].
5.
Copying of the driver is completed, and the [Completion of the new hardware detection wizard] dialog box
appears; click [Complete].
Graphics Accelerator Driver
Standard graphics accelerator drivers that are mounted will be installed automatically. The following is the procedure
when it is necessary to install manually.
If you want to use optional Graphics Accelerator Driver board, follow the document attached to the board to install the
driver.
1.
Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "SETUP.EXE" in the following directory.
4.
Follow the on-screen instructions to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to continue.
5.
Remove the EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow the on-screen instructions and
restart the system.