beautypg.com

Removal – NEC 140He User Manual

Page 274

background image

9-16

6.

Connect the interface cable.

Connect the SCSI and power cables secured in the 5.25-inch device bay to the 5.25-inch device.

IMPORTANT:

A connector cap is attached to the power cable. Keep the removed cap for

future use.

7.

Push the 5.25-inch device to the device bay carefully until a click occurs to lock it.

IMPORTANT:

„

If the SCSI connector "Ch-B" is connected to the additional HDD cage, install the
optional SCSI controller board to connect with the 5.25-inch device.

„

Connector pin bending or incomplete connection may cause a malfunction to occur.
Provide the connection securely watching the 5.25-inch device and cable connectors.

NOTE:

Make sure that the cable is not caught.

8.

Close the front door.

9.

Provide the setup for the SCSI controller.

If the 5.25-inch device is connected to optional SCSI controller board, refer to the manual that comes with the
SCSI controller board for setup.

Removal

Remove the 5.25-inch device in the reverse procedure of the installation.