NEC 140He - Manual (Page 83)

4-11
Memory Configuration
Selecting "Memory Configuration" on the Advanced menu shows the following screen.
See the table below for the items.
Option Parameter Description Your Setting
DIMM Group
#1 - #8
Status Normal
Not installed
Disabled
Indicates the current memory status.
"Normal" indicates that the memory devices operate normally.
"Disabled" indicates that one or more memory devices are
defected.
"Not Installed" indicates that no memory devices are installed.
(Display only)
Memory
Retest [No]
Yes Clears the DIMM group error status information. Run this menu
when the failed DIMM(s) are replaced.
Extended
RAM Step 1MB
1KB
Every Location
[Disabled] "1MB" indicates that the memory test is done in the unit of 1MB.
"1KB" indicates that the memory test is done in the unit of 1KB.
"Every-Location" indicates that every memory device is tested.
"Disabled" indicates that only memory initialization is done.
Online Spare
Memory [Disabled]
Enabled Select "Enabled" to enable the Online Spare Memory feature.
Memory RAS
Feature [Normal]
Mirror
RAID Set the memory configuration. Select "Mirror" to enable the
memory mirroring function. Select "RAID" to enable the memory
RAID function.
Hot-Add
Memory
Support [Disabled]
Enabled Specify whether to use the Hot-Add Memory feature on
Windows Server™ 2003 Enterprise Edition or Datacenter
Edition. Select "Enabled" to use the Hot-Add Memory feature.
[ ]: Factory-set