NEC 140He - Manual (Page 339)

D-7
DRIVER INSTALLATION AND ADVANCED SETTINGS
This section describes how to install and setup various standard drivers mounted on the device.
For information on installing and setting up a driver that is not described in this section, please refer to the document
attached to the driver.
PROSet
PROSet is a utility that confirms the function of network contained in network driver.
Utilizing PROSet enables the following items:
„ Confirm detailed information of the adapter.
„ Diagnose loop back test, packet transmission test and so on.
„ Setup of teaming.
Configuring several network adapters as one team provides the server a tolerant environment on any trouble and
enhances throughput between the switches.
PROSet is necessary to use these features.
Follow the procedure below to install PROSet:
1. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2. The [Windows Explorer] dialog starts.
* Procedure with the standard start menu
Click Start and click [Windows Explorer].
* Procedure with the classic start menu
Click Start, point to [Programs], [Accessories] and click [Windows Explorer].
3. Run "DXSETUP.EXE" in the following directory:
CD-ROM DriveLetter:\WINNT\W2K3AMD\NS1\PROSET\WS03_32E
The [Intel(R) PROSet - Install Shield Wizard] dialog starts.
4. Click [Next].
5. Choose "I accept the terms in the license agreement" and click [Next].
6. Click [Install].
7. When [Install Shield Wizard Completed] window is displayed, click [Finish].
8. Restart the system.