NEC 140He - Manual (Page 203)

7-7
7. Follow the Guide line shown at the bottom of the screen and press ESC to show the End user Menu shown
below.
Please choose a function by the arrow key and push Enter key.
Enduser Menu
TeDoLi (TEst & Diagnosis On Linux) Ver001.00 (Build020901.1.1m)
shows the diagnosis completed screen aforementioned.
shows the information of all the devices connected.
shows the log information and error messages of the diagnosis. It can be saved to a floppy
disk. To save the log information to a floppy disk, insert a formatted floppy disk in a floppy
disk drive and select .
change where to output log
Restarts the Express Server.
8. Select in the End user Menu above.
The Express Server restarts and EXPRESSBUILDER boot the system.
9. Exit EXPRESSBUILDER, and remove the CD-ROM from the CD-ROM drive.
10. Turn off the server and unplug the power cord from the receptacle.
11. Reconnect all the LAN cables to the server.
12. Plug the power code.
This completes the System Diagnostics.