beautypg.com

Expressbuilder for dos-based with local console, Starting expressbuilder – NEC 140He User Manual

Page 174

background image

6-4

EXPRESSBUILDER for DOS-Based with Local Console

This subsection describes the procedures for using EXPRESSBUILDER for DOS-based with local console.

Starting EXPRESSBUILDER

The following procedure instructs you to start EXPRESSBUILDER.

IMPORTANT: Do not remove the EXPRESSBUILDER CD-ROM while
EXPRESSBUILDER is running.

1.

Turn on peripheral devices and the server in this order.

2.

Insert the EXPRESSBUILDER CD-ROM supplied with your server into the CD-ROM drive of your server.

3.

Ensure that the floppy disk drive is empty.

4.

Press the RESET switch or press Ctrl, Alt, and Delete to reboot from the EXPRESSBUILDER. (You may
also turn off and then on again to reboot the server.)

EXPRESSBUILDER boots up displaying the top menu.

See also other documents in the category NEC Computers: