NEC 140He User Manual
Page 292
9-34
(7)
Click [Finish].
(9)
Remove the rear access cover and locate the slot from which the board has to be removed.
NOTE:
Confirm that the PCI Slot Power lamp of the target PCI slot is off.
To stop the device driver using the PCI hot-plug switch:
(1)
Remove the rear access cover and confirm the slot to remove the PCI board.
(2)
Press the PCI hot-plug switch on the slot from which the PCI board is to be removed.
NOTE:
Confirm that the PCI Slot Power lamp of the target PCI slot is off.
2.
Disconnect all the cables from the PCI board.
3.
Push the tab to unlock it, slowly open the tab, then remove the PCI board.
IMPORTANT:
Do not open the retention tab to 90 degrees or more. Doing so could
damage the tab.
Tab
Lock (for long card)
See also other documents in the category NEC Computers:
- Express 320Lc (4 pages)
- Express5800/120Rh-2 N8100-1125F (406 pages)
- Express NR579-02 (10 pages)
- Esmpro EXP350E (2 pages)
- MATWORX NWA-008862-001 (66 pages)
- 1320Xd (20 pages)
- 5020M-16 (149 pages)
- NECCare Standard/300 (11 pages)
- Express 5800/320Lb-R (302 pages)
- Express 5800/320Lc-R (357 pages)
- EXPRESS5800/100 SERIES N8100-1635F (152 pages)
- ExpressA1160 (252 pages)
- EXPRESS 320Lb (39 pages)
- NEAX2000 ND-91649 (58 pages)
- Server Express5800 (400 pages)
- NX7700i/5080H-32 (170 pages)
- EXP351E (2 pages)
- 5800 Series (12 pages)
- Express320F (2 pages)
- 320Fc (120 pages)
- set810 (2 pages)
- NEAX NDA-24349 (421 pages)
- Express5800 Series N8800-090F (358 pages)
- L320 (198 pages)
- Express 456-01721-000 (26 pages)
- INTEL 5800/1000 (12 pages)
- Care Express5800/FT (14 pages)
- Express5800/340Hb-R (4 pages)
- R320A-E4 (23 pages)
- Express 320Fc Systems (10 pages)
- PD75P308 (34 pages)
- Express 5800/230Eh (342 pages)
- Express N8800-063E/064E (145 pages)
- EXPRESS800 (78 pages)
- MH4500 (186 pages)
- NEAX 2000 IPS (96 pages)
- 2000 (137 pages)
- MC2400 (204 pages)
- Express120Bb-6 (2 pages)
- EXPRESS 320Lb-R (296 pages)
- 120Rf-2 (20 pages)
- A1160 (62 pages)
- 1080Xd (216 pages)