beautypg.com

List of optional devices and their available slots, Onboard lan controller considerations, Restriction on teaming among onboard lans – NEC 140He User Manual

Page 281

background image

9-23

List of Optional Devices and their Available Slots

PCI PCI

Express

PCI-X

#1 #2 #3 #4 #5 #6 #7 #8 #9

Bus A

Bus B

Bus C Bus D

Bus E

Bus F

Description

32-bit/33MHz x4

x8

64-bit/100MHz

Slot size

Full-height

PCI board type

5V

x8 socket

3.3V

Available board size

Long/short

Product Name

Hot-plug Non-hot-plug

Hot-plug

Initio 101

SCSI controller
(32bit/33MHz PCI)

*5

– – –

Adaptec 29320

SCSI controller
(64bit/133MHz PCI-X)

*5

– – –

SCSI U160 PCI-ATX-64b SCSI controller

(64bit/133MHz PCI-X)

*5

– – –

SecuRAID 321

Disk array controller
(64bit/66MHz PCI)

*4

– – – – –

Emulex LP1050

Fibre Channel controller
(2Gbps/Optical)
(64bit/133MHz PCI-X)

*4

– – – – –

64B PCI-X PRO 1000MT
DUAL

1000BASE-T Adapter
(2ch)(64bit/133MHz PCI-X)

*1

– – – – –

INTEL PRO/1000 TX
64-BIT PCI

1000BASE-T Adapter
(64bit/133MHz PCI-X)

*1

– – – – –

INTEL PRO/1000 F
64-BIT PCI

1000BASE-SX Adapter
(64bit/133MHz PCI-X)

*1

– – – – –

√: Can be installed. –: Cannot be installed.

*1

Only one card can be installed per a PCI-X bus.

*2

Up to two cards can be installed.

*3

Up to three cards can be installed.

*4

Up to four cards can be installed.

*5

Up to six cards can be installed.

NOTE:

The system BIOS initialises the PCI slots in the order shown below. The order

may be changed according to the types and number of PCI cards.

PCI#3

→PCI#4→PCI#5→PCI#8→PCI#9→PCI#6→PCI#7→PCI#1→PCI#2

Onboard LAN Controller Considerations

It is possible to configure the Teaming function of AFT (Adapter Fault Tolerance)/ALB (Adaptive Load Balancing) in a
standard network controller (on board LAN controller).

But it is also impossible to configure the Teaming function of the same AFT/ALB on a standard network controller and
an optional LAN board.

Restriction on Teaming among Onboard LANs

When teaming is configured among onboard LANs, the following system event log appears when Windows starts. You
can ignore this message and continue operation.

source: iANSMiniport

event IDs: 11/13/16/22