Driver installation and advanced settings, Proset – NEC 140He User Manual
Page 351
E-9
DRIVER INSTALLATION AND ADVANCED SETTINGS
This section describes how to install and setup various standard drivers mounted on the device.
For information on installing and setting up a driver that is not described in this section, please refer to the document
attached to the driver.
PROSet
PROSet is a utility that confirms the function of network contained in network driver.
Utilizing PROSet enables the following items:
Confirm detailed information of the adapter.
Diagnose loop back test, packet transmission test and so on.
Setup of teaming.
Configuring several network adapters as one team provides the server a tolerant environment on any trouble and
enhance throughput between the switches.
PROSet is necessary to use these features.
Follow the procedure below to install PROSet.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2.
The [Windows Explorer] dialog starts.
* Procedure with the standard start menu
Click Start and click [Windows Explorer].
* Procedure with the classic start menu
Click Start, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "PROSET.EXE" in the following directory:
The [Intel(R) PROSet - InstallShield Wizard] dialog starts.
4.
Click [Next].
5.
Choose "I accept the terms in the license agreement" and click [Next].
6.
Choose "Typical" and click [Next].
7.
Click [Install].
8.
When [InstallShield Wizard Completed] window is displayed, click [Finish].
9.
Restart the system.