NEC 140He - Manual (Page 67)

3-7
Keyboard
Mouse
Display
unit
Hub
(multiport repeater)
Device with USB interface (USB2.0)
(e.g., terminal adapter)
REAR
Printer with
parallel interface
Network system on LAN
(connected via a hub)
Management Only
Device with serial
interface (e.g.,
modem)
Device with ICMB interface
(e.g., disk expansion unit)
Hub
(multiport repeater)
Finally connect the provided
power cord to the receptacle.
If connecting the server to UPS,
see the explanation below. Use this inlet only
when an optional
power supply unit is
additionally installed.
IMPORTANT:
„ Power off the server and a peripheral device before connection. Connecting a powered
peripheral device to the powered server will cause malfunctions and failures.
„ To connect a third-party peripheral device or interface cable to the server, contact your
service representative for availability of such a device or cable. Some third-party
devices may not be used for the server.
„ A leased line cannot be connected directly to the serial port connectors.