B.3 lif (low insertion force) port pinout, B.4 tether port pinout – Psion Teklogix Schnellstart- Anleitung 7525 User Manual
Page 350
Appendix B: Port Pinouts
LIF (Low Insertion Force) Port Pinout
B-2
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
B.3 LIF (Low Insertion Force) Port Pinout
B.4 Tether Port Pinout
PIN #
Signal Name
1
Ground
2
Ground
3
USB Host Data Plus, For connecting USB devices
4
USB Host Data Minus, For connecting USB Devices
5
USB Host Power, for powering USB devices (5V, 100mA Max)
6
DC Power in, for supplying power to WORKABOUT PRO / charging
battery (5V, 3A)
7
DC Power in, for supplying power to WORKABOUT PRO / charging
battery (5V, 3A)
8
LIF Detect, determines if a device is attached to the LIF
9
USB Device Data Minus, for operating the WORKABOUT PRO as a
USB device
10
USB Device Data Plus, for operating the WORKABOUT PRO as a
USB device
11
Ground
12
Ground
PIN #
Signal Name
1
Ground
2
USB Host Data Plus, For connecting USB Devices
3
USB Host Data Minus, For connecting USB Devices
4
USB Host Power, for powering USB devices (5V, 100mA Max)
5
TX Data } TX Data and RX Data are only available on terminals with no
internal Bluetooth
6
RX Data }
7
Tether Detect, determines if a device is attached to the Tether port
8
DC Power In, for supplying power to WORKABOUT PRO / charging
battery (5V, 3A)